Month: October 2026

Jam Table at SEACompression

The shakedown cruise at SEACompression last weekend went VERY well – Hundreds of people plunked, strummed, drummed and banged on the Jam Table (and the Gong Rack, which I hung nearby).

The instruments suffered only a few minor casualties: I broke the D string tuning up the bass (fortunately Ted Brown Music had a spare) – and two percussion-rack instruments proved to be a bit vulnerable to aggressive drumming; The little xylophone shed a key when one of its mounting nails popped out, and the fish-shaped woodblock lost its nose – easily reglued.

Revelation: The bass was very hard to hear, thanks to the PA in the room next door bumping dubstep. But the other instruments sounded fine, and once the music stopped (during strike next morning) the bass filled the room beautifully.

Now to work on finding this crazy thing a regular or long-term home.

Skinned and assembled, ready for play

Getting ready for the table’s first gig – I finished installing the soundports and the edge banding, and installed all the instruments as designed.

It’s starting lo look, as this mechanic I know used to say, pretty foxy.

A few more adjustments are due: I want to angle the xylophone keyboard toward the player (It looks great in mockup), I need to connect several pairs of sticks and mallets so they don’t wander off, and give them somewhere on the table to hang while awaiting players.

And I need to bolt down the percussion rack so it doesn’t wander during play.

Then I throw the whole thing into a U-Haul and take it to SEACompression this weekend.

It’ll be something of a shakedown cruise; Burners are often hard on installations, and I’ll be glad to see where it breaks in the short term so I can iterate the design to last.

Bulletproofing the table top

I originally thought to build this crazy thing to be hardy enough to withstand Seattle winters.

The stainless steel base would be impervious. The xylophone keys had lived outside on XyloVan for more than a decade without much worse wear than a little tarnish. The kick drum is an old paint bucket, and its hardware is all aluminum and steel.

And … well, the bass and the percussion rack turned out to be a bit more vulnerable, so maybe I’ll wind up sewing an enormous snood out of weatherproof tarps to protect it against the elements.

But I had always planned for it to be durable. I looked for a while at my wife’s lovely idea of paving it with shiny metal scales punched out of aluminum cans, and then covering it in a thick coat of deep pour resin.

But the cost, the hassle – and the design-integration challenges of making that all work with the way the instruments were installed proved to be too daunting.

So I fell back to plan A – cover it with galvanized metal.

Rather than sheeting it with a monolithic slab of metal, I used steel flashing, which comes in a 14inch-wide roll, and installed ribs of 1/8×3/4-inch aluminum strap. I predrilled holes for the fasteners into the aluminum, ran a bead of vinyl caulk along each of the seams, and then nailed the ribs down through said holes with copper boat nails, which look pretty fetching.

The next problem was how to help sound from the bass and kick drum escape into the sound being created by the other musicians.

My solution was to cut round sound ports in the table surface and fit them with stainless-steel drains.

Sooo, let the jokes ensue. I know I’m asking for it.